Build uClinux for EA2478 Board

From Klaus' wiki
Revision as of 15:57, 2 August 2010 by Klaus (Talk | contribs)

Jump to: navigation, search

Just a mini howto:

Make a xen-virtualised Centos.

Install development tools

yum groupinstall "development tools"
yum install ncurses-devel zlib-devel libacl-devel lzo-devel uuid-devel

Create /home/emb/eadisk

mkdir -p /home/emb/eadisk

Copy the extra directory on the EA DVD to /home/emb/eadisk or by using

cd /home/emb/eadisk
scp -r <your login>@bren.hih.au.dk:/home/emb/extra/ .

Create the file /home/emb/uClinux-dist/settings.sh and put in the following:

#
# Setup script for uCLinux development environment.
# Run using 'source ./settings.sh'
#
# Copyright (c) 2006 uCLogix
#
 
script_name='settings.sh'
 
#
# Make sure our current working directory represents
# a valid uCLinux environment.
#
if [ ! -f $script_name ]; then
 
  echo
  echo Please change to the root directory of your uCLinux
  echo environment and type \'source ./$script_name\'.
  echo
 
else
 
  UCLINUX=`pwd`
  export UCLINUX
  export UCLINUX_VER=0.40-final
 
  # Figure out host system architecture
  # for now, only linux-i386 supported
  HOSTARCH=linux-i386
 
  #
  # Add required binary tools to the user's search path
  #
  PATH=$UCLINUX/bin:$PATH
  PATH=$UCLINUX/usr/local/bin:$PATH
  PATH=/home/emb/uClinux-dist/usr/local/bin/:$PATH
  PATH=/usr/local/lib/gcc-lib/arm-elf/2.95.3:$PATH
  #
  # Check for "." or ".\" in the path - it's broken
  #
  echo $PATH | tr ":" "\n" | grep '^\./*$' > /dev/null &&
        echo "WARNING: '.' detected in PATH - fixing it." 1>&2
  PATH=`echo ${PATH} | tr ":" "\n" | grep -v '^\./*$' | tr "\n" ":"`
 
  PATH=${PATH}:/home/emb/uClinux-dist/usr/local/bin/
 
  export PATH
 
  echo uCLinux environment set to \'$UCLINUX\'
 
fi

Now in /home/emb execute these commands (where you in the menuconfigs vendor section select Embedded Artists and the board purchased) :

ln -s eadisk/extra/* .
tar zxvf uClinux-dist-20070130.tar.gz
 
cd uClinux-dist
rm -rf linux-2.*
 
tar zxvf ../linux-2.6.21.tar.gz
mv linux-2.6.21/ linux-2.6.x
 
gunzip -c ../ea-uClinux-081020.diff.gz | patch -p1  
gunzip -c ../ea-v3_1_incr1.diff.gz | patch -p1

Edit the arm-elf-tools-20040427.sh file changing line 39 to look exactly like this:

tail -n +${SKIP} ${SCRIPT} | gunzip | tar xvf -

Execute this command:

sh arm-elf-tools-20040427.sh

Ignore any "burps" from gunzip at the end of the file.

Copy the precompiled file system utilities to uClinux-dist/bin folder:

cp /home/emb/eadisk/extra/mk*fs* bin/
chmod a+x bin/mkcramfs

Now install the arm linux tools

source settings.sh
 
tar zxvf ../arm-linux-tools-20061213.tar.gz

Important! Install Uboot before continuing.

After the u-boot has been successfully installed and compiled finish up the kernel configuration:

cp ../u-boot-1.1.6/tools/mkimage bin/
chmod a+x bin/mkimage
 
make menuconfig # Select proper vendor and board - exit twice to save the new settings after selection of the proper hardware
make