Build uClinux for EA2478 Board

From Klaus' wiki
Revision as of 06:50, 4 November 2010 by Klaus (Talk | contribs)

Jump to: navigation, search

A mini howto

Make a xen-virtualised Centos or use the one assigned to you.

Install development tools

log in to your virtual server as root user and do this:

$ yum groupinstall "development tools"
$ yum install ncurses-devel zlib-devel libacl-devel lzo-devel uuid-devel
$ yum update # Updates the server completely
$ init 6 # Reboots the server

The server reboots and uses the newest kernel and other software packages updated.

Prepare for the Embedded Artists SW

Log in again as root

Create /home/emb/eadisk

$ mkdir -p /home/emb/eadisk

Get the EA realese

Copy the extra directory on the EA DVD to /home/emb/eadisk or by using

$ cd /home/emb/eadisk
$ scp -r <your login> .

Prepare settings

Create the file /home/emb/uClinux-dist/ and put in the following:

# Setup script for uCLinux development environment.
# Run using 'source ./'
# Copyright (c) 2006 uCLogix
# Make sure our current working directory represents
# a valid uCLinux environment.
if [ ! -f $script_name ]; then
  echo Please change to the root directory of your uCLinux
  echo environment and type \'source ./$script_name\'.
  export UCLINUX
  export UCLINUX_VER=0.40-final
  # Figure out host system architecture
  # for now, only linux-i386 supported
  # Add required binary tools to the user's search path
  # Check for "." or ".\" in the path - it's broken
  echo $PATH | tr ":" "\n" | grep '^\./*$' > /dev/null &&
        echo "WARNING: '.' detected in PATH - fixing it." 1>&2
  PATH=`echo ${PATH} | tr ":" "\n" | grep -v '^\./*$' | tr "\n" ":"`
  export PATH
  echo uCLinux environment set to \'$UCLINUX\'

Prepare the distribution

Now in /home/emb execute these commands:

$ ln -s eadisk/extra/* .
$ tar zxvf uClinux-dist-20070130.tar.gz
$ cd uClinux-dist
$ rm -rf linux-2.*
$ tar zxvf ../linux-2.6.21.tar.gz
$ mv linux-2.6.21/ linux-2.6.x
$ gunzip -c ../ea-uClinux-081020.diff.gz | patch -p1  
$ gunzip -c ../ea-v3_1_incr1.diff.gz | patch -p1

Edit the file changing line 39 to look exactly like this (note the -n):

tail -n +${SKIP} ${SCRIPT} | gunzip | tar xvf -

Execute this command:

$ sh

Ignore any "burps" from gunzip at the end of the file.

Copy the precompiled file system utilities to uClinux-dist/bin folder:

$ cp /home/emb/eadisk/extra/mk*fs* bin/
$ chmod a+x bin/mkcramfs

Install the arm linux tools

$ source
$ tar zxvf ../arm-linux-tools-20061213.tar.gz

Install u-boot

Important! Install Uboot before continuing.

Finish the kernel configuration

After the u-boot has been successfully installed and compiled finish up the kernel configuration:

$ cp ../u-boot-1.1.6/tools/mkimage bin/
$ chmod a+x bin/mkimage
$ make menuconfig # Select proper vendor and board - 
                  # exit twice to save the new settings 
                #after selection of the proper hardware
$ make # Be patient - take a mug of coffee or the like

If no errors, you are up running!

First time you have to load the uBoot using for instance FlashMagic on your local PC. When the first copy of uBoot has been install all the rest can be loaded using tftp.

What you may need now is to setup a Tftp server.