Difference between revisions of "HBS1 software installation"
From Klaus' wiki
Line 28: | Line 28: | ||
$ tar xzf build/uClinux-dist-hbs1.tar.gz | $ tar xzf build/uClinux-dist-hbs1.tar.gz | ||
$ # compile the uBoot | $ # compile the uBoot | ||
− | $ cd u-boot-1.1.2 | + | $ cd u-boot-1.1.2 |
+ | $ sh build.sh | ||
+ | $ cd .. | ||
$ # compile the uClinux | $ # compile the uClinux | ||
− | $ cd | + | $ cd uClinux-dist |
+ | $ make menuconfig | ||
+ | $ # Just exit imediately | ||
+ | $ sh build.sh | ||
+ | $ # Hit return when the compilations stops and you're asked a quiestion | ||
</source> | </source> | ||
Revision as of 19:17, 3 November 2010
In order to install the distribution that comes with the Diax HBS1's follow these guidlines.
Log in as root.
$ # ensure that your envronment is up to date $ yum install gcc binutils gzip make diffutils bison flex libncurses-devel zlib $ # to eliminate some constraints built in the built system make a symbolic link for sed in /usr/bin $ ln -s /bin/sed /usr/bin/sed $ # make a directory to work in, e.g. /home/eml1 $ mkdir -p /home/eml1 $ cd /home/eml1 $ # copy the distribution CD from bren $ scp <your login>@bren.hih.au.dk:~/tmp/Diax.tar.gz . $ # unpack the distribution $ tar zxf Diax.tar.gz
A directory named Diax-Cd is created. In the build directory are the software.
$ cd Diax-CD $ # unpack the arm-elf tools $ sh build/arm-elf-tools-base-gcc3.4.0-20090114.sh $ # unpack the uBoot $ tar -xzf build/u-boot-1.1.2-hbs1.tar.gz $ # unpack the uClinux distribution $ tar xzf build/uClinux-dist-hbs1.tar.gz $ # compile the uBoot $ cd u-boot-1.1.2 $ sh build.sh $ cd .. $ # compile the uClinux $ cd uClinux-dist $ make menuconfig $ # Just exit imediately $ sh build.sh $ # Hit return when the compilations stops and you're asked a quiestion
Configure the tftp server by following these instructions: Tftp
Copy the compiled packages to the tftp server. Hint: Can be built in the build.sh script in the uClinux distribution
$ cp uimage.gz og uromfs.gz /tftpboot