Difference between revisions of "Install Uboot"
From Klaus' wiki
| Line 1: | Line 1: | ||
| − | Follow this guide to install | + | Follow this guide to install u-boot for your embedded device. |
<source lang="bash"> | <source lang="bash"> | ||
| − | tar xjvf u-boot-1.1.6.tar.bz2 | + | $ tar xjvf u-boot-1.1.6.tar.bz2 |
| − | cd u-boot-1.1.6 | + | $ cd u-boot-1.1.6 |
| − | gunzip -c ../u-boot-1.1.6-ea_v1_9_0.diff.gz |patch -p1 | + | $ gunzip -c ../u-boot-1.1.6-ea_v1_9_0.diff.gz |patch -p1 |
| − | gunzip –c ../u-boot-1.1.6-ea_v1_9_1.diff.gz| patch –p1 | + | $ gunzip –c ../u-boot-1.1.6-ea_v1_9_1.diff.gz| patch –p1 |
| − | gunzip -c ../u-boot-1.1.6-ea_v1_9_1_incr1.diff.gz | patch -p1 | + | $ gunzip -c ../u-boot-1.1.6-ea_v1_9_1_incr1.diff.gz | patch -p1 |
| − | gunzip -c ../u-boot-1.1.6-ea_v1_9_1_incr2.diff.gz | patch -p1 | + | $ gunzip -c ../u-boot-1.1.6-ea_v1_9_1_incr2.diff.gz | patch -p1 |
| − | make LPC2478OEM_Board_32bit_config # or make LPC2478OEM_Board_16bit_config if that's the one you've got. | + | $ make LPC2478OEM_Board_32bit_config # or make LPC2478OEM_Board_16bit_config if that's the one you've got. |
| − | make | + | $ make |
| − | /home/emb/uClinux-dist/usr/local/bin/arm-linux-objcopy -I binary -O ihex u-boot.bin u-boot.hex | + | $ /home/emb/uClinux-dist/usr/local/bin/arm-linux-objcopy -I binary -O ihex u-boot.bin u-boot.hex |
</source> | </source> | ||
If you were in the middle of compiling your kernel return to the kernel configuration. [[Build uClinux for EA2478 Board]] | If you were in the middle of compiling your kernel return to the kernel configuration. [[Build uClinux for EA2478 Board]] | ||
Revision as of 07:40, 29 September 2010
Follow this guide to install u-boot for your embedded device.
$ tar xjvf u-boot-1.1.6.tar.bz2 $ cd u-boot-1.1.6 $ gunzip -c ../u-boot-1.1.6-ea_v1_9_0.diff.gz |patch -p1 $ gunzip –c ../u-boot-1.1.6-ea_v1_9_1.diff.gz| patch –p1 $ gunzip -c ../u-boot-1.1.6-ea_v1_9_1_incr1.diff.gz | patch -p1 $ gunzip -c ../u-boot-1.1.6-ea_v1_9_1_incr2.diff.gz | patch -p1 $ make LPC2478OEM_Board_32bit_config # or make LPC2478OEM_Board_16bit_config if that's the one you've got. $ make $ /home/emb/uClinux-dist/usr/local/bin/arm-linux-objcopy -I binary -O ihex u-boot.bin u-boot.hex
If you were in the middle of compiling your kernel return to the kernel configuration. Build uClinux for EA2478 Board
