NFS mount on EA board
Exporting a directory from the development host and mounting this directory eases the development process.
In /etc/exports add this line
where directory is the directory you want to export to the net and the hostname is for instance an IP address of your EA board. The options can be rw,sync.
Change to suit your requirements.
You'll have to enable a few ports extra in the NFS configuration file: /etc/sysconfig/nfs
Remove the remarks (#) on the lines with these port numbers:
LOCKD_TCPPORT=32803 LOCKD_UDPPORT=32769 MOUNTD_PORT=892 STATD_PORT=662
And every time you have changed in /etc/exports or other configuration files you have to reload nfs service.
/sbin/service nfs reload
Configure the firewall to allow NFS traffic to come through
Select Customize and set a star in the NFS4 field and add in the field for other ports the following ports:
111:tcp 111:udp 32803:tcp 32803:udp 32769:tcp 32769:udp 892:tcp 892:udp 662:tcp 662:udp
To check if your set-up is working correct issue this command on your bren login:
[klausk@bren ~]$ /usr/sbin/showmount -e 10.1.18.212 Export list for 10.1.18.212: /home/nfsexport 10.1.18.73,10.2.2.82
On the EA board issue this command:
mount -t nfs -o nolock,rsize=4096,wsize=4096 < source host>:< source export directory> <destination directory>
where the < source host> can be an IP address, the < source directory> is the directory that was exported from the development host and <destination directory> is the directory on where the exported directory shall be mounted.